GVISION ITALIA SRL

FROM MANUAL READING TO CONTINUOUS MONITORING: ARTIFICIAL INTELLIGENCE FOR ANALOG INSTRUMENTS

From Periodic Checks to Continuous Monitoring
In industrial plants, a small change in an instrument reading can be the first sign of a developing problem. GVision uses artificial intelligence and computer vision to continuously monitor analog instruments, turning measurements that were previously checked only during operator rounds into traceable, realtime data. By working with existing instrumentation, the solution helps identify anomalies earlier while avoiding the need for new cabling or replacement of installed instruments. In an industrial plant, a parameter that begins to deviate from normal operating conditions may be the first indication that a machine is under stress. If that value is not read when the change occurs, the anomaly may continue until it causes a shutdown or damage, with economic consequences far greater than those of preventive intervention.

Yet in many plants, analog instruments are still read during periodic operator rounds. Four hours or even an entire shift may pass between rounds, during which no data is available for that measurement point. A change occurring immediately after the operator’s inspection may therefore go unnoticed until the next check, when intervention may already be more complex and costly.

To reduce this observation gap, GVision has developed a system for reading analog instruments based on artificial intelligence. The operating principle relies on computer vision. A camera frames the instrument dial and the software analyzes the position of the needle frame by frame. The value is calibrated against the specific instrument’s full-scale range and recorded together with the video.

Each reading therefore retains its visual reference, making it possible to verify the needle position at the exact moment of acquisition. For each measurement point, an attention threshold and an alarm threshold can be configured. When the measured value exceeds the set limit, the system automatically generates an event and associates it with a still image of the dial at the precise moment the condition is detected. The system can therefore highlight a variation before it necessarily develops into a failure.

Another significant aspect concerns the required infrastructure. There is no need to replace the analog instruments already installed, nor to bring new signals or power supplies to the measurement point. Computer vision makes it possible to acquire values from existing instruments without turning each measurement point into a newly wired installation, an especially relevant advantage in classified areas.

The GVision solution is already in operation in industrial and petrochemical environments. A real-world application provides four video streams from an operating plant, with measurement values overlaid on the images and more than 2,500 readings recorded. It is a concrete example of applying computer vision to analog instrumentation.
The system makes it possible to move from an occasional snapshot of plant conditions to a continuous sequence of readings. This allows the evolution of a parameter to be monitored even when an operator is not physically in front of the instrument, while building a historical record of the measured values.

For companies with panels or instruments that are currently not monitored, GVision offers a preliminary feasibility assessment. It is sufficient to send a photograph of the dial: based on the image, the team can assess whether the instrument is readable, which camera is suitable and from what distance the reading can be performed.
The approach adds a layer of digitalization to existing instrumentation, using artificial intelligence and computer vision to make data continuous, traceable and verifiable, without necessarily modifying the instrument or introducing new cabling at the measurement point.

COMPANY PROFLE
GVision Italia is a leading company in the Italian security sector, specialising in video surveillance, access control and video management solutions. With 25 years of experience, the company is the Italian reference point for GeoVision systems, offering a comprehensive range of technologies for professional and industrial applications.
Its portfolio includes IP and thermal cameras, NVR and VMS systems, licenceplate recognition, access control and advanced video analytics, as well as specialised solutions designed for challenging environments. GVision Italia works with customers and system integrators to develop solutions tailored to specific security and operational requirements. Based in Giussano, in the province of Monza and Brianza, with a branch in Bari, the company provides support throughout the entire project, from system design and configuration to installation, testing and technical assistance. Particular attention is also dedicated to cybersecurity, regulatory compliance and product quality, supported by ISO 27001, ISO 9001 and ISO 14001 certifications.

For more information, please visit:
🌐 www.gvision.it