Why choose Omo Grassi’s tables?
The OMO company was founded in 1961 and specializes in the construction of ROTARY TABLES
In the first years of its foundation, MANUAL TABLES were produced to which, over time, the MOTORIZED, PNEUMATIC and finally with NUMERICAL CONTROL versions have been added.
The production is large and includes:
– HORIZONTAL ROTARY TABLES, MANUAL,
– HORIZONTALT and VERTICAL, MANUAL, ROTARY TABLES
– TILTING ROTARY TABLES
– VISUALIZED ROTARY TABLES, horizontal, horizontal and vertical, tilting
– N.C. ROTARY TABLES mod. SPARK and SPINNER
Of particular interest are the SPARK and SPINNER models. They are used to automatically divide the round angle (360 °) into equal and / or differentiated parts (divisions not equal to each other), without any manual intervention by the operator using our control unit.
Alternatively, the tables can be connected directly to an additional axis or to a free axis of a machine tool without the need for our NC control unit. The boards can work in the following ways:
•STAND ALONE – With the Spark NC table positioned by our programmable control unit powered from the main factory power supply bolted to a machine table or operated as verification equipment away from the machine table. The Spark NC table is operated by manual push button (START) by an operator. This form allows for automatic division, constant or non- constant contouring or continuous rotation.
•AUTOMATIC – It is possible to reproduce all the above operations automatically, removing the need of an operator, by starting the table by external microswitch or starting signal (M). Spark tables can be connected directly to any NC by means of a special connector, thus obtaining complete integration with the machine itself.
•FOURTH AXIS – It is also possible to connect the Spark NC table directly to any suitable NC machine
with a spare or fourth axis drive. In this format the Spark NC table will complete all the tasks described above with the addition of spiral milling under the command of the machine tool.
All the tables are tested with a modern laser instrument (RENISHAW), the production is accompanied by detailed instructions, drawings and certificates of guarantee and testing.
It is possible to view the entire production by consulting
the website: https://www.omograssi.it